Basic Functions
50 9836 3521 01
Handling of windows
With the menu View you can select which dockable windows you want to show and also if the toolbar
and/or the status bar should be displayed.
It is also possible to restore the factory default view from here and save your own view configuration..
If you have a number of windows on the screen at the same time you can get these rearranged in a
structured way. Use the menu choices Window-Cascade etc. Note that these options will not scale the
dockable windows.
The layout of most windows are saved when ToolsTalk PowerMACS is closed and will be restored when
ToolsTalk PowerMACS is started again.