Basic Functions
9836 3521 01 79
Identity of traces
Select View | Extras | Identify from the menu to display a list with identity information about each trace.
It is possible to change color of one or many traces at the same time. To change color of one trace, simply
click on the colored button to the left in the list. A color dialog is displayed where a new color can be
selected for the trace. To change color of many traces at the same time, hold down the CTRL key and
click on the traces to select them. Then click on one of the selected traces colored button to the left.
Note! It is only possible to change the color when only one curve is displayed for each trace, i.e. only one
quantity on the vertical axis is selected. If two quantities are selected, all curves for the quantity on
the left vertical axis will be displayed in red and all curves for the quantity on the right vertical axis
will be displayed in blue.
Print
Select Trace | Print from the menu to print the trace currently displayed.
To Next Page
Loading...
Need help?
General
