SmartROC D65 Tier 4 Final 5 RCS drilling system
61
Direct selection menu F2 Settings 2
n Laser Plane: Selection of laser plane function.
n Dist. Laser Sens. to Drill Bit
n Dist. to Ref. Laser Plan:Used when there are several laser planes present. The ref-
erence plane is always the uppermost laser plane.
n Magazine Direction Automatic Rod Add
l CW: The carousel rotates clockwise
l CCW: The carousel rotates anticlockwise
n Automatic Switching: Jaw / Drill Support: Automatic function switching for Lever
36 on the left-hand operator's panel. In manual mode Button 3 must be used.
n Try Rod Add Without Adapter-Rod-Break: Simplified unthreading without breaking.
If unthreading does not succeed then full breaking takes place automatically. Only ap-
plies during automatic drilling.
n MWD logging (Option): Activates the MWD function. MWD presents a range of values
from drilling in the ROC Manager. Requires a USB memory stick in the socket on the
right post at the display.
USB Socket
To Next Page
Loading...
