Version 7.0 1043 Mediant 3000
User's Manual 58. Configuration Parameters Reference
Parameter Description
IPOutboundManipulation_SrcHost,
IPOutboundManipulation_DestUsernamePrefix,
IPOutboundManipulation_DestHost,
IPOutboundManipulation_CallingNamePrefix,
IPOutboundManipulation_MessageConditionName,
IPOutboundManipulation_RequestType,
IPOutboundManipulation_ReRouteIPGroupName,
IPOutboundManipulation_Trigger,
IPOutboundManipulation_ManipulatedURI,
IPOutboundManipulation_RemoveFromLeft,
IPOutboundManipulation_RemoveFromRight,
IPOutboundManipulation_LeaveFromRight,
IPOutboundManipulation_Prefix2Add,
IPOutboundManipulation_Suffix2Add,
IPOutboundManipulation_PrivacyRestrictionMode,
IPOutboundManipulation_DestTags, IPOutboundManipulation_SrcTags;
[\IPOutboundManipulation]
For a description of the table, see ''Configuring IP-to-IP Outbound
Manipulations'' on page 627.
SBC Routing Policy Table
SBC Routing Policy
[SBCRoutingPolicy]
Defines SBC Routing Policies.
The format of the ini file table parameter is as follows:
[SBCRoutingPolicy]
FORMAT SBCRoutingPolicy_Index = SBCRoutingPolicy_Name,
SBCRoutingPolicy_LCREnable,
SBCRoutingPolicy_LCRAverageCallLength,
SBCRoutingPolicy_LCRDefaultCost,
SBCRoutingPolicy_LdapServerGroupName;
[\SBCRoutingPolicy]
For a description of the table, see ''Configuring SBC Routing Policy
Rules'' on page 616.
Dial Plan Table
Dial Plan
dial-plan
[DialPlans]
Defines the name of the Dial Plan.
The format of the ini file table parameter is as follows:
[ DialPlan ]
FORMAT DialPlan_Index = DialPlan_Name;
[ \DialPlan ]
For a description of the table, see Configuring Dial Plans on page 633.
Dial Plan Rule Table
Dial Plan Rule
dial-plan-rule
[DialPlanRule]
Defines the dial plan rules per Dial Plan.
For a description of the table, see Configuring Dial Plans.
Note:
 The table is hidden in the ini file.
 To configure Dial Plan rules from a file, see Importing and Exporting
Dial Plans on page 637.
To Next Page
Loading...
Need help?
General
