AudioCodes Mediant 3000 User Manual

Version 7.0 153 Mediant 3000
User's Manual 13. Network
4. The NTP application is configured (through the ini file) to serve as OAMP
applications:
EnableNTPasOAM = 1
13.3.3.4 VoIP Interfaces with Multiple Default Gateways
Below is a configuration example using default gateways per IP network interface. In this
example, the default gateway 200.200.85.1 is available for applications allowed on
Interface #1, whereas outgoing management traffic (originating on Interface #0) is never
directed to this default gateway.
Table 13-8: Configured Default Gateway Example
Index
Applica
tion
Type
Interface
Mode
IP Address
Prefix
Length
Default
Gateway
VLAN
ID
Interface
Name
0 OAMP
IPv4
Manual
192.168.085.214
16 0.0.0.0 100 Mgmt
1
Media &
Control
IPv4
Manual
200.200.85.14 24 200.200.85.1 200 CntrlMedia
A separate Static Route table lets you configure static routing rules. Configuring the
following static routing rules enables OAMP applications to access peers on subnet
17.17.0.0 through the gateway 192.168.0.1.
Table 13-9: Separate Static Route Table Example
Destination Prefix Length Gateway
Interface
Name
17.17.0.0 16 192.168.0.1 Mgmt

AudioCodes Mediant 3000 Specifications

General

Brand	AudioCodes
Model	Mediant 3000
Category	Gateway
Language	English