Version 7.0 89 Mediant 3000
User's Manual 7. Web-Based Management
7.4 Displaying Login Information upon Login
The device can display login information immediately upon Web login.
 To enable display of user login information upon a successful login:
1. Open the Web Security Settings page (Configuration tab > System menu >
Management > Web Security Settings).
2. From the 'Display Login Information' drop-down list, select Yes.
3. Click Submit.
Once enabled, the Login Information window is displayed upon a successful login, as
shown in the example below:
Figure 7-21: Login Information Window
To Next Page
Loading...
Need help?
General
