Version 7.0 67 Mediant 3000
User's Manual 7. Web-Based Management
7.1.6 Working with Configuration Pages
The configuration pages contain the parameters for configuring the device and are
displayed in the Work pane.
7.1.6.1 Accessing Pages
The configuration pages are accessed by clicking the required page item in the Navigation
tree.
To open a configuration page:
1. On the Navigation bar, click the required tab (Configuration, Maintenance, or Status
& Diagnostics); the menus pertaining to the selected tab appear in the Navigation
tree.
2. Navigate to the required page item, by performing the following:
• Drill-down using the plus sign to expand the menu and submenus.
• Drill-up using the minus sign to collapse the menu and submenus.
3. Click the required page item; the page opens in the Work pane.
You can also access previously opened pages by clicking the Web browser's Back button
until you have reached the required page. This is useful if you want to view pages in which
you have performed configurations in the current Web session.
Note: Depending on the access level of your Web user account, certain pages may
not be accessible or may be read-only (see ''Configuring Web User Accounts'' on
page 82). If a page is read-only, "Read-Only Mode" is displayed at the bottom of the
page.
7.1.6.2 Viewing Parameters
Some pages allow you to view a reduced or expanded display of parameters. The Web
interface provides two methods for displaying page parameters:
Displaying "basic" and "advanced" parameters - see ''Displaying Basic and Advanced
Parameters'' on page
67
Displaying parameter groups - see ''Showing / Hiding Parameter Groups'' on page 68
7.1.6.2.1 Displaying Basic and Advanced Parameters
Some pages provide a toggle button that allows you to show and hide parameters. This
button is located on the top-right corner of the page and has two display states:
Advanced Parameter List button with down-pointing arrow: click this button to
display all parameters.
Basic Parameter List button with up-pointing arrow: click this button to show only
common (basic) parameters.
To Next Page
Loading...
Need help?
General
