User's Manual 1058 Document #: LTRT-89730
Mediant 3000
Parameter Description
[LdapServersSearchDNs]
objects in the AD where the query is done, per LDAP server.
The format of the ini file table parameter is as follows:
[ LdapServersSearchDNs ]
FORMAT LdapServersSearchDNs_Index =
LdapServersSearchDNs_Base_Path,
LdapServersSearchDNs_LdapConfigurationIndex,
LdapServersSearchDNs_SearchDnInternalIndex;
[ \LdapServersSearchDNs ]
For a detailed description of the table, see ''Configuring LDAP DNs
(Base Paths) per LDAP Server'' on page 254.
Management LDAP Groups Table
Management LDAP Groups
Table
[MgmntLDAPGroups]
Defines the users group attribute in the AD and corresponding
management access level.
The format of the ini file table parameter is as follows:
[ MgmntLDAPGroups ]
FORMAT MgmntLDAPGroups_Index =
MgmntLDAPGroups_LdapConfigurationIndex,
MgmntLDAPGroups_GroupIndex, MgmntLDAPGroups_Level,
MgmntLDAPGroups_Group;
[ \MgmntLDAPGroups ]
For a description of the table, see ''Configuring Access Level per
Management Groups Attributes'' on page 256.
LDAP Server Groups Table
LDAP Server Groups Table
[LDAPServersGroup]
Defines LDAP Server Groups.
The format of the ini file table parameter is as follows:
[ LdapServersGroup ]
FORMAT LdapServersGroup_Index = LdapServersGroup_Name,
LdapServersGroup_ServerType, LdapServersGroup_SearchMethod,
LdapServersGroup_CacheEntryTimeout,
LdapServersGroup_CacheEntryRemovalTimeout,
LdapServersGroup_SearchDnsMethod;
[ \LdapServersGroup ]
For a description of the table, see ''Configuring LDAP Server Groups''
on page 248.
58.14.3 Least Cost Routing Parameters
The Least Cost Routing (LCR) parameters are described in the table below.
Table 58-77: LCR Parameters
Parameter Description
Cost Group Table
[CostGroupTable]
Defines the Cost Groups for LCR, where each Cost Group is
configured with a name, fixed call connection charge, and a call rate
(charge per minute).
[ CostGroupTable ]
FORMAT CostGroupTable_Index =
CostGroupTable_CostGroupName,
CostGroupTable_DefaultConnectionCost,