AudioCodes Mediant 3000 User Manual

Version 7.0 1057 Mediant 3000
User's Manual 58. Configuration Parameters Reference
Parameter Description
[MSLDAPMobileNumAttribut
eName]
The valid value is a string of up to 49 characters. The default is
"mobile".
[MSLDAPPrivateNumAttribut
eName]
Defines the name of the attribute that represents the user's private
number in the AD. If this value equals the value of the
MSLDAPPrimaryKey or MSLDAPSecondaryKey parameter, then the
device queries the AD for the destination number in this private
attribute name; otherwise, the parameter is not used as a search key.
The default is "msRTCSIP-PrivateLine".
MS LDAP DISPLAY Name
Attribute Name
[MSLDAPDisplayNameAttrib
uteName]
Defines the attribute name that represents the Calling Name in the AD
for LDAP queries based on calling number.
The valid value is a string of up to 49 characters. The default is
"displayName".
[MSLDAPPrimaryKey]
Defines the name of the attribute used as a query search key for the
destination number in the AD. This is used instead of the "PBX"
attribute name (configured by the MSLDAPPBXNumAttributeName
parameter).
The default is not configured.
[MSLDAPSecondaryKey]
Defines the name of the attribute used as the second query search
key for the destination number in the AD, if the primary search key or
PBX search is not found.
LDAP Cache Service
[LDAPCacheEnable]
Enables the LDAP cache service.
 [0] Disable (default)
 [1] Enable
Notes:
 For the parameter to take effect, a device reset is required.
 For more information on LDAP caching, see ''Configuring the
Device's LDAP Cache'' on page 258.
LDAP Configuration Table
LDAP Configuration Table
[LdapConfiguration]
Defines LDAP servers.
The format of the ini file table parameter is as follows:
[ LdapConfiguration ]
FORMAT LdapConfiguration_Index = LdapConfiguration_Group,
LdapConfiguration_LdapConfServerIp,
LdapConfiguration_LdapConfServerPort,
LdapConfiguration_LdapConfServerMaxRespondTime,
LdapConfiguration_LdapConfServerDomainName,
LdapConfiguration_LdapConfPassword,
LdapConfiguration_LdapConfBindDn, LdapConfiguration_Interface,
LdapConfiguration_MngmAuthAtt, LdapConfiguration_useTLS,
LdapConfiguration_ConnectionStatus;
[ \LdapConfiguration ]
For a description of the table, see ''Configuring LDAP Servers'' on
page 250.
LDAP Server Search Base DN Table
LDAP Server Search Base
Defines the full base path (i.e., distinguished name / DN) to the

AudioCodes Mediant 3000 Specifications

General

Brand	AudioCodes
Model	Mediant 3000
Category	Gateway
Language	English