EasyManuals Logo

AudioCodes Mediant 3000 User Manual

AudioCodes Mediant 3000
1070 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #935 background imageLoading...
Page #935 background image
Version 7.0 935 Mediant 3000
User's Manual 58. Configuration Parameters Reference
58.10 Gateway Application Parameters
58.10.1 Fax and Modem Parameters
The fax and modem parameters are described in the table below.
Table 58-41: Fax and Modem Parameters
Parameter Description
Fax Transport Mode
[FaxTransportMode]
Determines the fax transport mode used by the device.
ï‚§ [0] Disable = transparent mode
ï‚§ [1] T.38 Relay (default)
ï‚§ [2] Bypass
ï‚§ [3] Events Only
Note: The parameter is overridden by the parameter IsFaxUsed. If
the parameter IsFaxUsed is set to 1 (T.38 Relay) or 3 (Fax
Fallback), then FaxTransportMode is always set to 1 (T.38 relay).
[V34FaxTransportType]
Determines the V.34 fax transport method (whether V34 fax falls
back to T.30 or pass over Bypass).
ï‚§ [0] = Transparent
ï‚§ [1] = (Default) Relay
ï‚§ [2] = Bypass
ï‚§ [3] = Transparent with Events
Note: To configure V34FaxTransportType to 1 (i.e., fax relay), you
also need to configure FaxTransportMode to 1 (fax relay).
V.21 Modem Transport Type
[V21ModemTransportType]
Determines the V.21 modem transport type.
ï‚§ [0] Disable = (Default) Transparent.
ï‚§ [2] Enable Bypass
ï‚§ [3] Events Only = Transparent with Events.
Note: You can also configure this functionality per specific calls,
using IP Profiles (IpProfile_VxxTransportType). For more
information, see ''Configuring IP Profiles'' on page 391.
V.22 Modem Transport Type
[V22ModemTransportType]
Determines the V.22 modem transport type.
ï‚§ [0] Disable = Transparent.
ï‚§ [2] Enable Bypass (default)
ï‚§ [3] Events Only = Transparent with Events.
Note: You can also configure this functionality per specific calls,
using IP Profiles (IpProfile_VxxTransportType). For more
information, see ''Configuring IP Profiles'' on page 391.
V.23 Modem Transport Type
[V23ModemTransportType]
Determines the V.23 modem transport type.
ï‚§ [0] Disable = Transparent.
ï‚§ [2] Enable Bypass (default)
ï‚§ [3] Events Only = Transparent with Events.
Note: You can also configure this functionality per specific calls,
using IP Profiles (IpProfile_VxxTransportType). For more
information, see ''Configuring IP Profiles'' on page 391.
V.32 Modem Transport Type Determines the V.32 modem transport type.

Table of Contents

Other manuals for AudioCodes Mediant 3000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AudioCodes Mediant 3000 and is the answer not in the manual?

AudioCodes Mediant 3000 Specifications

General IconGeneral
BrandAudioCodes
ModelMediant 3000
CategoryGateway
LanguageEnglish

Related product manuals