AudioCodes Mediant 3000

User's Manual 752 Document #: LTRT-89730
Mediant 3000
that can be used to contact that specific instance of the user agent for subsequent
requests.
 To view registered SAS/SBC users in the Users Registration database:

Web: SAS/SBC Registered Users page (Status & Diagnostics tab > VoIP Status
menu > SAS/SBC Registered Users).
Figure 51-7: SAS/SBC Registered Users Page
51.8 Viewing Registration Status
The Registration Status page displays the registration status of the device'sSIP Accounts,
which are configured in the Accounts table (see ''Configuring Registration Accounts'' on
page 363).
 To view registration status:

Open the Registration Status page (Status & Diagnostics tab > VoIP Status menu >
Registration Status).
• Registered Per Gateway (applicable only to the Gateway application):
Registration of device as one entity - "YES" or "NO"
• Accounts Registration Status:
♦ Group Type: served Trunk Group or IP Group
♦ Group Name: name of served Trunk Group or IP Group, if applicable
♦ Status: "Registered" or "Unregistered"
Note: The registration mode (i.e., per device, endpoint, account. or no registration) is
configured in the Trunk Group Settings table (see Configuring Trunk Group Settings
on page 463) or using the TrunkGroupSettings ini file parameter.