AudioCodes Mediant 3000 User Manual

Version 7.0 1055 Mediant 3000
User's Manual 58. Configuration Parameters Reference
Parameter Description
[RadiusTO]
RADIUSRetransmission parameter.
The valid range is 1 to 30. The default is 10.
RADIUS Accounting Parameters
RADIUS Accounting Type
[RADIUSAccountingType]
Determines when the RADIUS accounting messages are sent to the
RADIUS accounting server.
 [0] At Call Release = (Default) Sent at call release only.
 [1] At Connect & Release = Sent at call connect and release.

[2]
At Setup & Release = Sent at call setup and release.
AAA Indications
[AAAIndications]
Determines the Authentication, Authorization and Accounting (AAA)
indications.
 [0] None = (Default) No indications.
 [3] Accounting Only = Only accounting indications are used.
RADIUS User Authentication Parameters
Use RADIUS for
Web/Telnet Login
[WebRADIUSLogin]
Enables RADIUS queries for Web and Telnet login authentication. When
enabled, logging into the device's Web and Telnet embedded servers is
done through a RADIUS server. The device communicates with a user-
defined RADIUS server and verifies the given username and password
against a remote database, in a secure manner.
 [0] Disable (default)
 [1] Enable
Notes:
 For RADIUS login authentication to function, you must also configure
the EnableRADIUS parameter to 1 (Enable).
 RADIUS authentication requires HTTP basic authentication, where
the username and password are transmitted in clear text over the
network. Therefore, it's recommended to set the HTTPSOnly
parameter to 1 to force the use of HTTPS, since the transport is
encrypted.
Password Local Cache
Mode
[RadiusLocalCacheMode]
Defines the device's mode of operation regarding the timer (configured
by the parameter RadiusLocalCacheTimeout) that determines the
validity of the username and password (verified by the RADIUS server).
 [0] Absolute Expiry Timer = When you access a Web page, the
timeout doesn't reset, instead it continues decreasing.
 [1] Reset Timer Upon Access = (Default) Upon each access to a
Web page, the timeout always resets (reverts to the initial value
configured by RadiusLocalCacheTimeout).
Password Local Cache
Timeout
[RadiusLocalCacheTimeo
ut]
Defines the time (in seconds) the locally stored username and password
(verified by the RADIUS server) are valid. When this time expires, the
username and password become invalid and a must be re-verified with
the RADIUS server.
The valid range is 1 to 0xFFFFFF. The default is 300 (5 minutes).
 [-1] = Never expires.

[0]
= Each request requires RADIUS authentication.
RADIUS VSA Access
Level Attribute
[RadiusVSAAccessAttribut
Defines the code that indicates the access level attribute in the Vendor
Specific Attributes (VSA) section of the received RADIUS packet.
The valid range is 0 to 255. The default is 35.

AudioCodes Mediant 3000 Specifications

General

Brand	AudioCodes
Model	Mediant 3000
Category	Gateway
Language	English