User's Manual 1060 Document #: LTRT-89730
Mediant 3000
Parameter Description
HTTPRemoteServices_LoginNeeded,
HTTPRemoteServices_PersistentConnection,
HTTPRemoteServices_NumOfSockets,
HTTPRemoteServices_AuthUserName,
HTTPRemoteServices_AuthPassword,
HTTPRemoteServices_TLSContext,
HTTPRemoteServices_VerifyCertificate,
HTTPRemoteServices_TimeOut,
HTTPRemoteServices_KeepAliveTimeOut,
HTTPRemoteServices_ServiceStatus;
[\HTTPRemoteServices]
For a description of the table, see ''Configuring HTTP Services'' on
page 279.
HTTP Remote Hosts
[HTTPRemoteHosts]
Defines remote HTTP hosts per HTTP-based service.
The format of the ini file table parameter is as follows:
[HTTPRemoteHosts]
FORMAT HTTPRemoteHosts_Index =
HTTPRemoteHosts_HTTPRemoteServiceIndex,
HTTPRemoteHosts_RemoteHostIndex, HTTPRemoteHosts_Name,
HTTPRemoteHosts_Address, HTTPRemoteHosts_Port,
HTTPRemoteHosts_Interface,
HTTPRemoteHosts_HTTPTransportType,
HTTPRemoteHosts_HostStatus;
[\HTTPRemoteHosts]
For a description of the table, see ''Configuring Remote HTTP Hosts''
on page 282.
Topology Status
[RoutingServerGroupStatus]
Enables the reporting of the device's topology status (using the REST
TopologyStatus API command) to HTTP remote hosts.
 [0] Disable (default)
 [1] Enable
For more information, see ''Configuring HTTP Services'' on page 279.
To Next Page
Loading...
Need help?
General
