AudioCodes Mediant 3000

User's Manual 126 Document #: LTRT-89730
Mediant 3000
Parameter Description
Ciphers Server
[TLSContexts_Server
CipherString]
Defines the supported cipher suite for the TLS server (in OpenSSL cipher list
format).
For valid values, refer to URL
http://www.openssl.org/docs/apps/ciphers.html. The default is "AES:RC4".
For example, use "ALL" for all ciphers suites (e.g., for ARIA encryption for
TLS). The only ciphers available are RC4 and DES, and the cipher bit
strength is limited to 56 bits.
Notes:
 If the installed Software License Key includes the Strong Encryption
feature, the default of the parameter is changed to RC4:EXP, enabling
RC-128-bit encryption.
 The value "ALL" can be used only if the installed Software License Key
includes the Strong Encryption feature.
Ciphers Client
[TLSContexts_ClientC
ipherString]
Defines the supported cipher suite for TLS clients.
The valid value is up to 255 strings (e.g., "EXP"). The default is "ALL:!ADH".
For possible values and additional details, refer to
http://www.openssl.org/docs/apps/ciphers.html.
OCSP Server
[TLSContexts_OcspE
nable]
Enables or disables certificate checking using OCSP.
 [0] Disable (default)
 [1] Enable
Primary OCSP Server
[TLSContexts_OcspS
erverPrimary]
Defines the IP address (in dotted-decimal notation) of the primary OCSP
server.
The default IP address is 0.0.0.0.
Secondary OCSP
Server
[TLSContexts_OcspS
erverSecondary]
Defines the IP address (in dotted-decimal notation) of the secondary OCSP
server (optional).
The default IP address is 0.0.0.0.
OCSP Port
[TLSContexts_OcspS
erverPort]
Defines the OCSP server's TCP port number.
The default port number is 2560.
OCSP Default
Response
[TLSContexts_OcspD
efaultResponse]
Determines whether the device allows or rejects peer certificates if it cannot
connect to the OCSP server.
 [0] Reject (default)
 [1] Allow