User's Manual 192 Document #: LTRT-89730
Mediant 3000
Parameter Name Description
Remote Tunnel Addr
[IPsecSATable_RemoteTu
nnelAddress]
Defines the IP address of the peer router.
Note: The parameter is applicable only if the Operational Mode is set to
Tunnel.
Remote Subnet Addr
[IPsecSATable_RemoteS
ubnetIPAddress]
Defines the IP address of the remote subnet. Together with the Prefix
Length parameter (below), the parameter defines the network with
which the IPSec tunnel allows communication.
Note: The parameter is applicable only if the Operational Mode is set to
Tunnel.
Remote Prefix Length
[IPsecSATable_RemoteS
ubnetPrefixLength]
Defines the prefix length of the Remote Subnet IP Address parameter
(in bits). The prefix length defines the subnet class of the remote
network. A prefix length of 16 corresponds to a Class B subnet
(255.255.0.0); a prefix length of 24 corresponds to a Class C subnet
(255.255.255.0).
Note: The parameter is applicable only if the Operational Mode is set to
Tunnel.
Interface Name
[IPsecSATable_InterfaceN
ame]
Assigns a network interface to this IPSec rule. The network interfaces
are defined in the Interface table ('Interface Name' column) in
''Configuring IP Network Interfaces'' on page 145
To Next Page
Loading...
Need help?
General
