User's Manual 280 Document #: LTRT-89730
Mediant 3000
The following procedure describes how to configure HTTP Remote Services through the
Web interface. You can also configure it through ini file (HTTPRemoteServices).
 To configure an HTTP-based service
1. Open the HTTP Remote Services table (Configuration tab > VoIP menu > Services
> HTTP Services > HTTP Remote Services).
2. Click Add; the following dialog box appears:
Figure 16-27: HTTP Remote Services Table - Add Row Dialog Box
3. Configure an HTTP remote service according to the parameters described in the table
below.
4. Click Add, and then save ("burn") your settings to flash memory.
Table 16-13: HTTP Remote Services Table Parameter Descriptions
Parameter Description
Index
[HTTPRemoteServices_Ind
ex]
Defines an index number for the new table row.
Notes:
 Each row must be configured with a unique index.
 The parameter is mandatory.
Name
[HTTPRemoteServices_Na
me]
Defines an arbitrary name to easily identify the row.
The valid value is a string of up to 40 characters.
Notes:
 Each row must be configured with a unique name.
 The parameter is mandatory.
Path
[HTTPRemoteServices_Pat
h]
Defines the path (prefix) to the REST APIs.
The valid value is a string of up to 80 characters. The default is "api".
To Next Page
Loading...
Need help?
General
