Version 7.0 389 Mediant 3000
User's Manual 20. Coders and Profiles
Table 20-4: Tel Profile Table Parameters and Corresponding Global Parameters
Tel Profile Parameter Global Parameter
Common
Index
[TelProfile_Index]
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Profile Name
[TelProfile_ProfileName]
Defines an arbitrary name to easily identify the row.
The valid value is a string of up to 20 characters.
Profile Preference
[TelProfile_TelPreference]
Defines the priority of the Tel Profile, where 1 is the lowest priority and 20
the highest priority.
Notes:
1. If both the IP Profile and Tel Profile apply to the same call, the coders and
common parameters of the Preferred profile are applied to the call.
2. If the Preference of the Tel Profile and IP Profile are identical, the Tel
Profile parameters are applied.
3. If the coder lists of both the IP Profile and Tel Profile apply to the same
call, only the coders common to both are used. The order of the coders is
determined by the preference.
Fax Signaling Method
[TelProfile_IsFaxUsed]
IsFaxUsed
Enable Digit Delivery
[TelProfile_EnableDigitDelivery]
EnableDigitDelivery
Time For Reorder Tone
[TelProfile_TimeForReorderTone]
TimeForReorderTone
Disconnect Call on Detection of Busy Tone
[TelProfile_DisconnectOnBusyTone]
DisconnectOnBusyTone
Enable Voice Mail Delay
[TelProfile_EnableVoiceMailDelay]
VoiceMailInterface
This is useful for disabling voice mail services per Trunk Group to eliminate
the phenomenon of call delay on Trunks that do not implement voice mail
when voice mail is enabled using the global parameter.
Dial Plan Index
[TelProfile_DialPlanIndex]
DialPlanIndex
Swap Tel To IP Phone Numbers
[TelProfile_SwapTelToIpPhoneNumbers]
SwapTEl2IPCalled&CallingNumbers
Digital Cut Through
[TelProfile_DigitalCutThrough]
DigitalCutThrough
Call Priority Mode
[TelProfile_CallPriorityMode]
CallPriorityMode
IP Related
To Next Page
Loading...
Need help?
General
