AudioCodes Mediant 3000 User Manual

Version 7.0 467 Mediant 3000
User's Manual 23. Trunk Groups
Parameter Description
in the Tel-to-IP Routing table take precedence over the selected
Serving IP Group ID.
MWI Interrogation Type
[TrunkGroupSettings_MWII
nterrogationType]
Defines message waiting indication (MWI) QSIG-to-IP interworking for
interrogating MWI supplementary services:
 [255] Not Configured
 [0] None = Disables the feature.
 [1] Use Activate Only = MWI Interrogation messages are not sent
and only "passively" responds to MWI Activate requests from the
PBX.
 [2] Result Not Used = MWI Interrogation messages are sent, but the
result is not used. Instead, the device waits for MWI Activate
requests from the PBX.
 [3] Use Result = MWI Interrogation messages are sent, its results
are used, and the MWI Activate requests are used. MWI Activate
requests are interworked to SIP NOTIFY MWI messages. The SIP
NOTIFY messages are sent to the IP Group defined by the
NotificationIPGroupID parameter.
Note: The parameter appears in the table only if the VoiceMailInterface
parameter is set to 3 (QSIG) (see Configuring Voice Mail on page 541).
Used By Routing Server
used-by-routing-server
[TrunkGroupSettings_Used
ByRoutingServer]
Enables the use of the Trunk Group by a routing server for routing
decisions.
 [0] Not Used (default)
 [1] Used
For more information, see Centralized Third-Party Routing Server on
page 284.
Admin State (Read-only) Displays the administrators state:
 "Locked": The Lock command has been chosen from the Action
drop-down button.
 "Unlocked": The Unlock command has been chosen from the
Action
drop-down button.
Status (Read-only) Displays the current status of the trunks/channels in the
Trunk Group:
 "In Service": Indicates that all channels in the Trunk Group are in
service, for example, when the Trunk Group is unlocked or Busy Out
state cleared (see the EnableBusyOut parameter for more
information).
 "Going Out Of Service": Appears as soon as you choose the Lock
command and indicates that the device is starting to lock the Trunk
Group and take channels out of service.
 "Going Out Of Service (<duration remaining of graceful period> se
c /
<number of calls still active> calls)": Appears when the device is
locking the Trunk Group and indicates the number of buys channels
and the time remaining until the graceful period ends, after which
the device locks the channels regardless of whether the call has
ended or not.
 "Out Of Service": All fully configured trunks in the Trunk Group are
out of service, for example, when the Trunk Group is locked or in
Busy Out state (see the EnableBusyOut parameter).

AudioCodes Mediant 3000 Specifications

General

Brand	AudioCodes
Model	Mediant 3000
Category	Gateway
Language	English