EasyManuals Logo
Home>AudioCodes>Gateway>Mediant 3000

AudioCodes Mediant 3000 User Manual

AudioCodes Mediant 3000
1070 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #478 background imageLoading...
Page #478 background image
User's Manual 478 Document #: LTRT-89730
Mediant 3000
Parameter Description
The default value is the asterisk (*) symbol (i.e., any source prefix).
Calling Name Prefix
[_CallingNamePrefix]
Defines the caller name (i.e., caller ID) prefix.
You can use special notations for denoting the prefix. For example, to
denote calls without a calling name, use the $ sign. For a description of
available notations, see ''Dialing Plan Notation for Routing and
Manipulation Tables'' on page 827.
The default value is the asterisk (*) symbol (i.e., any calling name
prefix).
Source Trunk Group ID
[_SrcTrunkGroupID]
Defines the source Trunk Group ID from where the Tel-to-IP call was
received.
The default value is -1, which denotes any Trunk Group.
Note: The parameter is applicable only to the Calling Name
Manipulation Table for Tel-to-IP Calls table.
Source IP Address
[_SourceAddress]
Defines the source IP address of the caller, for IP-to-Tel calls. The
source IP address appears in the SIP Contact header in the INVITE
message.
The default value is the asterisk (*) symbol (i.e., any IP address). The
source IP address can include the following wildcards:
ï‚§ "x" wildcard: represents single digits. For example, 10.8.8.xx
represents all IP addresses between 10.8.8.10 to 10.8.8.99.
ï‚§ "*" (asterisk) wildcard: represents any number between 0 and 255.
For example, 10.8.8.* represents all IP addresses between 10.8.8.0
and 10.8.8.255.
Note: The parameter is applicable only to the Calling Name
Manipulation Table for IP-to-Tel Calls table.
Source Host Prefix
[_SrcHost]
Defines the URI host name prefix of the incoming SIP INVITE message
in the From header.
The default value is the asterisk (*) symbol (i.e., any source host prefix).
Notes:
ï‚§ The parameter is applicable only to the Calling Name Manipulation
Table for IP-to-Tel Calls table.
ï‚§ If the P-Asserted-Identity header is present in the incoming INVITE
message, the value of the parameter is compared to the P-Asserted-
Identity URI host name (instead of the From header).
Destination Host Prefix
[_DestHost]
Defines the Request-URI host name prefix of the incoming SIP INVITE
message.
The default value is the asterisk (*) symbol (i.e., any destination host
prefix).
Note: The parameter is applicable only to the Calling Name
Manipulation Table for IP-to-Tel Calls table.
Operation (Action)
Stripped Characters From
Left
[_RemoveFromLeft]
Defines the number of characters to remove from the left of the calling
name. For example, if you enter 3 and the calling name is
"company:john", the new calling name is "pany:john".
Stripped Characters From
Right
Defines the number of characters to remove from the right of the calling
name. For example, if you enter 3 and the calling name is

Table of Contents

Other manuals for AudioCodes Mediant 3000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AudioCodes Mediant 3000 and is the answer not in the manual?

AudioCodes Mediant 3000 Specifications

General IconGeneral
BrandAudioCodes
ModelMediant 3000
CategoryGateway
LanguageEnglish

Related product manuals