AudioCodes Mediant 3000 User Manual

User's Manual 482 Document #: LTRT-89730
Mediant 3000
Parameter Description
[_RemoveFromLeft]
Stripped Digits From Right
[_RemoveFromRight]
Defines the number of digits to remove from the right of the redirect
number prefix. For example, if you enter 3 and the redirect number is
5551234, the new number is 5551.
Number of Digits to Leave
[_LeaveFromRight]
Defines the number of digits that you want to retain from the right of the
redirect number.
Prefix to Add
[_Prefix2Add]
Defines the number or string that you want added to the front of the
redirect number. For example, if you enter 9 and the redirect number is
1234, the new number is 91234.
Suffix to Add
[_Suffix2Add]
Defines the number or string that you want added to the end of the
redirect number. For example, if you enter 00 and the redirect number
is 1234, the new number is 123400.
TON
[_NumberType]
Defines the Type of Number (TON).
The default is Not Configured [-1].
 If NPI is set to Unknown, you can set TON to Unknown [0].
 If NPI is set to Private, you can set TON to Unknown [0],
International [1], National [2], Network Specific [3] or Subscriber [4].
 If NPI is set to E.164 Public, you can set TON to Unknown [0],
International [1], National [2], Network Specific [3], Subscriber [4] or
Abbreviated [6].
For more information on available NPI/TON values, see Numbering
Plans and Type of Number on page 494.
NPI
[_NumberPlan]
Defines the Numbering Plan Indicator (NPI).
 [-1] Not Configured = (Default) Value received from PSTN/IP is used
 [0] Unknown
 [1] E.164 Public
 [9] Private
For more information on available NPI/TON values, see Numbering
Plans and Type of Number on page 494.
Presentation
[_IsPresentationRestricted]
Enables caller ID.
 [0] Allowed = Sends Caller ID information when a call is made using
these destination / source prefixes.
 [1] Restricted = Restricts Caller ID information for these prefixes.
Note: If the parameter is set to Restricted and the 'AssertedIdMode'
parameter is set to Add P-Asserted-Identity, the From header in the
INVITE message includes the following:
From: 'anonymous' <sip:
anonymous@anonymous.invalid> and 'privacy: id'
header.

AudioCodes Mediant 3000 Specifications

General

Brand	AudioCodes
Model	Mediant 3000
Category	Gateway
Language	English