Version 7.0 509 Mediant 3000
User's Manual 25. Routing
Parameter Description

Trunk Group ID
[PstnPrefix_TrunkGroupI
d]
Defines the Trunk Group ID to where the incoming SIP call is sent.
Trunk ID
[PstnPrefix_TrunkId]
Defines the Trunk to where the incoming SIP call is sent.
Notes:
 If both 'Trunk Group ID' and 'Trunk ID' parameters are configured in
the table, the routing is done according to the 'Trunk Group ID'
parameter.
 To configure the method for selecting the trunk's channel to which the
IP call is sent, see the global parameter, ChannelSelectMode.
IP Profile
[PstnPrefix_ProfileName]
Assigns an IP Profile (configured in ''Configuring IP Profiles'' on page 391)
to the call.
Call Setup Rules Set ID
[PstnPrefix_CallSetupRul
esSetId]
Assigns a Call Setup Rule Set ID to the routing rule. The device performs
the Call Setup rules of this Set ID if the incoming call matches the
characteristics of the routing rule. The device routes the call to the
destination according to the routing rule's configured action, only after it
has performed the Call Setup rules.
For configuring Call Setup rules, see ''Configuring Call Setup Rules'' on
page 287.
To Next Page
Loading...
Need help?
General
