AudioCodes Mediant 3000 User Manual

Version 7.0 589 Mediant 3000
User's Manual 31. Configuring Admission Control
Parameter Description
[SBCAdmissionControl_
AdmissionControlName]
defined.
Limit Type
[SBCAdmissionControl_L
imitType]
Defines the entity to which the rule applies.
 [0] IP Group (default)
 [1] SRD
 [2] SIP Interface
SRD
[SBCAdmissionControl_
SRDName]
Assigns an SRD to the rule.
For all SRDs, configure the parameter to Any. By default, no value is
defined (None).
Note: The parameter is applicable only if 'Limit Type' is configured to
SRD.
IP Group
[SBCAdmissionControl_I
PGroupName]
Assigns an IP Group to the rule.
For all IP Groups, configure the parameter to Any. By default, no value is
defined (None).
Note: The parameter is applicable only if 'Limit Type' is configured to IP
Group.
SIP Interface
[SBCAdmissionControl_
SIPInterfaceName]
Assigns a SIP Interface to the rule.
For all SIP Interfaces, configure the parameter to Any. By default, no
value is defined (None).
Note: The parameter is applicable only if 'Limit Type' is configured to SIP
Interface.
Request Type
[SBCAdmissionControl_
RequestType]
Defines the SIP dialog-initiating request type to which you want to apply
the rule (not the subsequent requests that can be of different type and
direction).
 [0] All = (Default) Includes the total number of all dialogs.
 [1] INVITE
 [2] SUBSCRIBE
 [3] Other
Request Direction
[SBCAdmissionControl_
RequestDirection]
Defines the direction of the SIP request to which the rule applies.
 [0] Both = (Default) Rule applies to inbound and outbound SIP dialogs.
 [1] Inbound = Rule applies only to inbound SIP dialogs.

[2]
Outbound = Rule applies only to outbound SIP dialogs.
Reserved Capacity
[SBCAdmissionControl_
Reservation]
Defines the guaranteed (minimum) call capacity.
The default is 0 (i.e., no reserved capacity).
Notes:
 Reserved call capacity is applicable only to IP Groups and SRDs (i.e.,
the 'Limit Type' parameter must be configured to IP Group or SRD). If
you configure the 'Limit Type' parameter to SIP Interface, leave the
'Reserved Capacity' parameter at its' default (i.e., 0).
 Reserved call capacity is applicable only to INVITE and SUBSCRIBE
messages.
 Reserved call capacity must be less than the maximum capacity (limit)
configured for the CAC rule.
 The total reserved call capacity configured for all the CAC rules must
be within the device's total call capacity support.
Limit Defines the maximum number of concurrent SIP dialogs per IP Group,

AudioCodes Mediant 3000 Specifications

General

Brand	AudioCodes
Model	Mediant 3000
Category	Gateway
Language	English