AudioCodes Mediant 3000 User Manual

User's Manual 764 Document #: LTRT-89730
Mediant 3000
CDR Field Name Description Format
ReleaseTime
Call release time String of up to 35 characters
RedirectReason
Redirect reason String of up to 15 characters
RedirectURINum
Redirection URI String of up to 41 characters
RedirectURINumBe
foreMap
Redirect URI number before
manipulation
String of up to 41 characters
TxSigIPDiffServ
Signaling IP DiffServ String of up to 15 characters
IPGroup
IP Group ID and name String of up to 40 characters
SrdId
SRD ID and name String of up to 29 characters
SIPInterfaceId
SIP Interface ID String of up to 15 characters
ProxySetId
Proxy Set ID String of up to 15 characters
IpProfileId
IP Profile ID and name String of up to 34 characters
MediaRealmId
Media Realm ID and name String of up to 55 characters
DirectMedia
Direct media or traversing SBC:
 "yes"
 "no"
String
SIPTrmReason
SIP call termination reason
(BYE, CANCEL, or SIP error
codes, e.g., 404)
String of up to 12 characters
SipTermDesc
Description of SIP termination
reason:

SIP Reason header, if exists,
for example: SIP ;cause=200
;text="Call completed
elsewhere".
 If no SIP Reason header
exists, the description is
taken from the reason text, if
exists, of the SIP response
code, for example: "417
Unknown Resource-Priority".
 If no reason text exists in the
SIP response code, the
description is taken from an
internal SIP response
mapping mechanism. For
example, if the device
receives a SIP response
"422", it sends in the CDR
"422 Session Interval Too
Small method" as the
description.
String of up to 26 characters
Caller
Name of caller String of up to 36 characters
Callee
Name of called party String of up to 36 characters
Below shows an example of an SBC signaling CDR sent at the end of a call (call was
terminated normally):

AudioCodes Mediant 3000 Specifications

General

Brand	AudioCodes
Model	Mediant 3000
Category	Gateway
Language	English