User's Manual 774 Document #: LTRT-89730
Mediant 3000
Gateway CDR Format Table Parameter Descriptions
Parameter Description
Index
[GWCDRFormat_Index]
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
CDR Type
cdr-type
[GWCDRFormat_CDRTy
pe]
Defines the application type for which you want to customize CDRs.
 [0] Syslog Gateway = (Default) Customizes CDR field names for
CDRs sent in Syslog messages.
 [1] RADIUS Gateway = Customizes CDR field names (RADIUS
Attribute prefix names) for CDRs sent in RADIUS accounting
requests.
Column Type
col-type
[GWCDRFormat_Colum
nType]
Defines the CDR field (column) that you want to customize.
[0] CDR Type (default); [1] Call ID; [2] Session ID; [3] Report Type; [4]
Media Type; [5] Accounting Status Type; [6] H323 ID; [7] Radius Call ID;
[8] Blank; [10] Endpoint Type; [11] Call Orig; [12] Source IP; [13]
Destination IP; [14] Remote IP; [15] Source Port; [16] Dest Port; [17]
Remote Port; [18] Call Duration; [19] Termination Side; [20] Termination
Reason; [21] Setup Time; [22] Connect Time; [23] Release Time; [24]
Redirect Reason; [25] Was Call Started; [26] IP Group ID; [27] IP Group
Name; [28] SRD ID; [29] SRD Name; [30] SIP Interface ID; [31]
Transport Type; [32] Signaling IP DiffServ; [33] Termination Reason
Category; [34] Proxy Set ID; [35] IP Profile ID; [36] IP Profile Name; [37]
Media Realm ID; [38] Media Realm Name; [39] SIP Termination Reason;
[40] SIP Termination Description; [41] Caller Display ID; [42] Callee
Display ID; [43] SIPInterface Name; [44] Call Orig Radius; [45]
Termination Side Radius; [46] Termination Side Yes No; [47] Termination
Reason Value; [48] ProxySet Name; [100] Trunk ID; [101] B-Channel;
[102] Conn ID; [103] Trunk Group ID; [104] Metering Pulses Generated;
[105] Fax On Call; [106] Source Number Before Manipulation; [107]
Source Number; [108] Source Number Type; [109] Source Number Plan;
[110] Destination Number Before Manipulation; [111] Destination
Number; [112] Destination Number Type; [113] Destination Number
Plan; [114] Redirect Number Before Manipulation; [115] Redirect
Number; [116] Source Host Name Before Manipulation; [117] Source
Host Name; [118] Destination Host Name Before Manipulation; [119]
Destination Host Name; [120] PSTN Termination Reason; [121] Module
And Port; [122] AOC Currency; [123] AOC Amount; [124] AOC Multiplier;
[125] ISDN Line Type; [150] Channel ID; [151] Coder Type;[152] Packet
Interval; [153] Payload Type; [154] Local Input Packets; [155] Local
Output Packets; [156] Local Input Octets; [157] Local Output Octets;
[158] Local Packet Loss; [159] Local Round Trip Delay; [160] Local Jitter;
[161] Local SSRC Sender; [162] Remote Input Packets; [163] Remote
Output Packets; [164] Remote Input Octets; [165] Remote Output Octets;
[166] Remote Packet Loss; [167] Remote Round Trip Delay; [168]
Remote Jitter; [169] Remote SSRC Sender; [170] Local RTP IP; [171]
Local RTP Port; [172] Remote RTP IP; [173] Remote RTP Port; [174]
RTP IP DiffServ; [175] Local R Factor; [176] Remote R Factor; [177]
Local MOS CQ; [178] Remote MOS CQ; [179] AMD Decision; [180]
AMD Decision Probability; [181] Latched RTP IP; [182]Latched RTP
Port; [183] Latched T38 IP; [184] Latched T38 Port.
Title
title
[GWCDRFormat_Title]
Defines a new name for the CDR field (for Syslog) or for the RADIUS
Attribute prefix name (for RADIUS accounting) that you selected in the
'Column Type' parameter.
The valid value is a string of up to 31 characters.
To Next Page
Loading...
Need help?
General
