AudioCodes Mediant 3000 User Manual

Version 7.0 841 Mediant 3000
User's Manual 58. Configuration Parameters Reference
Table 58-8: Automatic Update of Software and Configuration Files Parameters
Parameter Description
General Automatic Update Parameters
[AutoUpdateCmpFile]
Enables the Automatic Update mechanism for the cmp file.
 [0] = (Default) The Automatic Update mechanism doesn't apply to the
cmp file.
 [1] = The Automatic Update mechanism includes the cmp file.
Note: For the parameter to take effect, a device reset is required.
[AutoUpdateFrequency]
Defines the interval (in minutes) that the device waits between
consecutive automatic updates.
The default is 0 (i.e., the update at fixed intervals mechanism is disabled).
Note: For the parameter to take effect, a device reset is required.
[AutoUpdatePredefinedTi
me]
Defines schedules (time of day) for performing automatic updates.
The format syntax of the parameter is 'hh:mm', where hh denotes the
hour and mm the minutes. The value must be enclosed in single
apostrophes. For example, '20:18'.
Notes:
 For the parameter to take effect, a device reset is required.
 The actual update time is randomized by five minutes to reduce the
load on the Web servers.
[AupdHttpUserAgent]
Defines the information sent in the HTTP User-Agent header in the HTTP
Get requests sent by the device to the provisioning server for the
Automatic Update mechanism.
The valid value is a string of up to 511 characters. The information can
include any user-defined string or the following string variable tags (case-
sensitive):
 <NAME>: product name, according to the installed Software License
Key
 <MAC>: device's MAC address
 <VER>: software version currently installed on the device, e.g.,
"7.00.200.001"
 <CONF>: configuration version, as configured by the ini file
parameter, INIFileVersion or CLI command, configuration-version
The device automatically populates these tag variables with actual values
in the sent header. By default, the device sends the following in the User-
Agent header:
User-Agent: Mozilla/4.0 (compatible; AudioCodes;
<NAME>;<VER>;<MAC>;<CONF>)
For example, if you set AupdHttpUserAgent = MyWorld-
<NAME>;<VER>(<MAC>), the device sends the following User-Agent
header:
User-Agent: MyWorld-
Mediant;7.00.200.001(00908F1DD0D3)
Notes:
 The variable tags are case-sensitive.
 If you configure the parameter with the <CONF> variable tag, you
must reset the device with a burn-to-flash for your settings to take

AudioCodes Mediant 3000 Specifications

General

Brand	AudioCodes
Model	Mediant 3000
Category	Gateway
Language	English