User's Manual 86 Document #: LTRT-89730
Mediant 3000
2. Click Add; the following dialog box is displayed:
Figure 7-20: Web Users Table - Add Record Dialog Box
3. Configure a Web user according to the parameters described in the table below.
4. Click Add, and then save ("burn") your settings to flash memory.
Table 7-12: Web User Table Parameter Descriptions
Parameter Description
Index Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Username
Defines the Web user's username.
The valid value is a string of up to 40 alphanumeric characters,
including the period ".", underscore "_", and hyphen "-" signs.
Password
Defines the Web user's password.
The valid value is a string of 8 to 40 ASCII characters, which must
adhere to the following guidelines:
 Include at least eight characters.
 Include at least two letters that are upper case (e.g., A).
 Include at least two letters that are lower case (e.g., a).
 Include at least two numbers (e.g., 4).
 Include at least two symbols (non-alphanumeric characters) (e.g., $,
#, %).
 Must contain no spaces.
 Include at least four new characters that were not used in the
previous password.
To Next Page
Loading...
Need help?
General
