User's Manual 870 Document #: LTRT-89730
Mediant 3000
Parameter Description
of this global parameter is ignored for calls associated with the IP Profile.
Offered SRTP Cipher
Suites
[SRTPofferedSuites]
Defines the offered crypto suites (cipher encryption algorithms) for SRTP.
ï‚§ [0] All = (Default) All available crypto suites.
ï‚§ [1] AES-CM-128-HMAC-SHA1-80 = device uses AES-CM encryption
with a 128-bit key and HMAC-SHA1 message authentication with a 80-
bit tag.
ï‚§ [2] AES-CM-128-HMAC-SHA1-32 = device uses AES-CM encryption
with a 128-bit key and HMAC-SHA1 message authentication with a 32-
bit tag.
ï‚§ [4] ARIA-CM-128-HMAC-SHA1-80 = device uses ARIA encryption
algorithm with a 128-bit key and HMAC-SHA1 message authentication
with a 32-bit tag.
ï‚§ [8] ARIA-CM-192-HMAC-SHA1-80 = device uses ARIA encryption
algorithm with a 192-bit key and HMAC-SHA1 message authentication
with a 32-bit tag.
Notes:
ï‚§ For enabling ARIA encryption, use the AriaProtocolSupport parameter.
ï‚§ The parameter also affects the selection of the crypto in the device's
answer. For example, if the device receives an offer with two crypto
lines containing HMAC_SHA1_80 and HMAC_SHA_32, it uses the
HMAC_SHA_32 key in its SIP 200 OK response if the parameter is set
to 2.
Aria Protocol Support
[AriaProtocolSupport]
Enables ARIA algorithm cipher encryption for SRTP. This is an alternative
option to the existing support for the AES algorithm. ARIA is a symmetric
key block cipher algorithm standard developed by the Korean National
Security Research Institute.
ï‚§ [0] Disable (default)
ï‚§ [1] Enable
Notes:
ï‚§ To configure the ARIA bit-key encryption size (128 or 192 bit) with
HMAC SHA-
1 cryptographic hash function, use the SRTPofferedSuites
parameter.
ï‚§ The ARIA feature is available only if the device is installed with a
Software License Key that includes this feature. For installing a
Software License Key, see Software License Key on page 697.
Disable Authentication
On Transmitted RTP
Packets
[RTPAuthenticationDisab
leTx]
Enables authentication on transmitted RTP packets in a secured RTP
session.
ï‚§ [0] Enable (default)
ï‚§ [1] Disable
Disable Encryption On
Transmitted RTP
Packets
[RTPEncryptionDisableT
x]
Enables encryption on transmitted RTP packets in a secured RTP
session.
ï‚§ [0] Enable (default)
ï‚§ [1] Disable
Disable Encryption On
Transmitted RTCP
Enables encryption on transmitted RTCP packets in a secured RTP
session.