AudioCodes Mediant 3000 User Manual

Version 7.0 889 Mediant 3000
User's Manual 58. Configuration Parameters Reference
Parameter Description
realm=”home1.net”, nonce=””,
response=”e56131d19580cd833064787ecc”
Note: This registration header is according to the IMS 3GPP TS24.229
and PKT-SP-24.220 specifications.
Add initial Route Header
[InitialRouteHeader]
Enables the inclusion of the SIP Route header in initial registration or re-
registration (REGISTER) requests sent by the device.
 [0] Disable (default)
 [1] Enable
When the device sends a REGISTER message, the Route header
includes either the Proxy's FQDN, or IP address and port according to
the configured Proxy Set, for example:
Route: <sip:10.10.10.10;lr;transport=udp>
or
Route: <sip: pcscf-gm.ims.rr.com;lr;transport=udp>
[UsePingPongKeepAlive] Enables the use of the carriage-return and line-feed sequences (CRLF)
Keep-Alive mechanism, according to RFC 5626 “Managing Client-
Initiated Connections in the Session Initiation Protocol (SIP)” for reliable,
connection-orientated transport types such as TCP.
 [0] Disable (default)
 [1] Enable
The SIP user agent/client (i.e., device) uses a simple periodic message
as a keep-alive mechanism to keep their flow to the proxy or registrar
alive (used for example, to keep NAT bindings open). For connection-
oriented transports such as TCP/TLS this is based on CRLF. This
mechanism uses a client-to-server "ping" keep-alive and a
corresponding server-to-client "pong" message. This ping-pong
sequence allows the client, and optionally the server, to tell if its flow is
still active and useful for SIP traffic. If the client does not receive a pong
in response to its ping, it declares the flow “dead” and opens a new flow
in its place. In the CRLF Keep-Alive mechanism the client periodically
(defined by the PingPongKeepAliveTime parameter) sends a double-
CRLF (the "ping") then waits to receive a single CRLF (the "pong"). If the
client does not receive a "pong" within an appropriate amount of time, it
considers the flow failed.
Note: The device sends a CRLF message to the Proxy Set only if the
Proxy Keep-Alive feature (EnableProxyKeepAlive parameter) is enabled
and its transport type is set to TCP or TLS. The device first sends a SIP
OPTION message to establish the TCP/TLS connection and if it receives
any SIP response, it continues sending the CRLF keep-alive sequences.
[PingPongKeepAliveTime] Defines the periodic interval (in seconds) after which a “ping” (double-
CRLF) keep-alive is sent to a proxy/registrar, using the CRLF Keep-Alive
mechanism.
The default range is 5 to 2,000,000. The default is 120.
The device uses the range of 80-100% of this user-defined value as the
actual interval. For example, if the parameter value is set to 200 sec, the
interval used is any random time between 160 to 200 seconds. This
prevents an “avalanche” of keep-alive by multiple SIP UAs to a specific
server.

AudioCodes Mediant 3000 Specifications

General

Brand	AudioCodes
Model	Mediant 3000
Category	Gateway
Language	English