CHAPTER2 SNMP Overview
Mediant 800 SBC | SNMP Reference Guide
All other objects in this table support GET only.
● dsx1CurrentTable
● dsx1IntervalTable
● dsx1TotalTable
● dsx1LineStatusChange trap
■ acPSTN MIB:
● acSonetSDHTable: currently has one entry (acSonetSDHFbrGrpMappingType) for
selecting a low path mapping type. Relevant only for PSTN applications. (Refer to the
MIB for more details.)
In addition to the standard MIBs, the complete product series contains proprietary MIBs:
■ AC-TYPES MIB: lists the known types defined by the complete product series. This is
referred to by the sysObjectID object in the MIB-II.
■ AcBoard MIB: includes the acTrap group.
Each proprietary MIB contains a Configuration subtree for configuring the related parameters.
In some, there also are Status and Action subtrees.
■ AcAnalog MIB
■ acControl MIB
■ acMedia MIB
■ acSystem MIB
■ acSysInterfaceStatusTable: supports the networking multiple interfaces feature status.
This table reflects all the device's active interfaces. The lines indices consist of both the
Entry Index and the Type Index. The table contains the following columns:
● Entry Index - related Interface index in the interface configuration table (if the table is
empty,i.e., there is only single IP address, the index appears with 0)
● Type Index - 1 for IP Address and 2 for IPv6 Link-Local Address
● Application Types - type assigned to the interface
● Status Mode - interface configuration mode
● IP Address - IP address (either IPv4 or IPv6) for this interface
● Prefix Length - number of ‘1’ bits in this interface’s net mask
● Gateway - default gateway
● Vlan ID - VLAN ID of this interface
● Name - interface’s name
● Primary DNS Server IP Address - IP address of primary DNS server for this interface
- 6 -
To Next Page
Loading...
