CHAPTER2 SNMP Overview
Mediant 800 SBC | SNMP Reference Guide
● Secondary DNS Server IP Address - IP address of secondary DNS server for this
interface
■ acSysModuleTable
■ acPSTN MIB
■ acGateway MIB: This proprietary MIB contains objects related to configuration of the SIP
device. This MIB complements the other proprietary MIBs. The acGateway MIB includes
the following groups:
● Common: parameters common to both SIP and H.323.
● SIP: SIP only parameters.
■ AcAlarm: This is a proprietary carrier-grade alarm MIB. It is a simpler implementation of
the notificationLogMIB and the IETF suggested alarmMIB (both supported).
The acAlarm MIB has the following groups:
● ActiveAlarm: straight forward (single indexed) table listing all currently active Alarms
together with their bindings (the Alarm bindings are defined in acAlarm.
acAlarmVarbinds and also in acBoard.acTrap. acBoardTrapDefinitions. oid_1_3_6_1_
4_1_5003_9_10_1_21_2_0).
● acAlarmHistory: straight forward (single indexed) table listing all recently sent Alarms
together with their bindings (the Alarm bindings are defined in acAlarm.
acAlarmVarbinds and also in acBoard.acTrap. acBoardTrapDefinitions. oid_1_3_6_1_
4_1_5003_9_10_1_21_2_0).
The table size can be altered by one of the following:
● notificationLogMIB.notificationLogMIBObjects.nlmConfig.nlmConfigGlobalEntryLimit
● noti-
fic-
ationLo-
gMIB.no-
tific-
ationLo-
gMIBOb-
jects.nlmConfig.nlmConfigLogTable.nlmConfigLogEntry.nlmConfigLogEntryLimit.
The table size (i.e., number of contained alarms) can be any value between 10 and 1,000
(default is 500)
- 7 -
To Next Page
Loading...
Need help?
General
