9500 Series Telephone User Guide Page 100
Issue 12b (Wednesday, March 28, 2018)IP Office™ Platform 11.0
Comments on this document? infodev@avaya.com
14.2 Logging Out
Logging out using the method below disassociates you from the extension. What happens then depends on whether you
are the default user of another extension and various other settings. This menu is only available if you already have a
security PIN/login code set.
To log out:
1. Press the Features soft key if shown. To do this during a call, press the PHONE key and then press the
Features soft key.
2. Use the up and down cursor keys to highlight Phone User. Press Select.
3. Use the up and down cursor keys to highlight Logout. Press Select.
4. You will be logged out of the phone. The follow actions will depend on several factors:
·
If the phone does not have a default user, or the default user is currently logged on elsewhere, the phone
displays 'no user' .
·
If the phone has a default user and they are not current logged on elsewhere, they are automatically logged
back in unless they are set to forced login.
·
If you are the default user of another extension that is free (doesn't have anyone else logged in to it), you are
automatically logged back in to that extension unless you are set to forced login.
Access Control
Your system administrator can configure whether you can access this menu option. See Menu Access Control .
14.3 Changing Your Security PIN
You can change your own security PIN (login code). This is not your voicemail code used for voicemail access. If set,
this PIN is used for logging in at other phones , locking your phone , and accessing system administration
features .
This menu is only available if you already have a security PIN/login code set.
1. Press the Features soft key if shown. To do this during a call, press the PHONE key and then press the
Features soft key.
2. Use the up and down cursor keys to highlight Phone User. Press Select.
3. Use the up and down cursor keys to highlight Set Security PIN. Press Select.
4. Enter your current security PIN if you already have one and press Done.
5. Enter your new password.
6. Press Save.
·
Code Enforcement
The system administrator can set rules for the required length of the code and to restrict the use of obvious
codes (1234, 1111). The system will not allow save the new code until those requirements have been meet.
Contact your system administrator for details of your systems settings if necessary.
Access Control
Your system administrator can configure whether you can access this menu option. See Menu Access Control .
99
155
94
99
101
144
155
To Next Page
Loading...
