Avaya 9504 - Headset Operation

9500 Series Telephone User Guide Page 70
Issue 12b (Wednesday, March 28, 2018)IP Office™ Platform 11.0
Comments on this document? infodev@avaya.com
10. Headset/Handsfree Operation
10.1 Headset Operation
Your phone has a headset socket. This is suitable for the connection of phone headsets that connect via a HIS headset
cable.
· If there are no currently connected call, a call answered or made by pressing an appearance button is connected
either handsfree or through the headset according to the phone's audio path setting . The same applies to
dialing a new call.
· If there is already a connected call to which you are talking through the headset, answering another call by
pressing the appearance button will answer that call using the headset.
To answer a call using a headset:
1. To answer a call using the headset, press the HEADSET button.
To end a headset call:
1. To end a headset call, press the HEADSET button.
· If the other party ends the call, the HEADSET button remains active. Press the button to end the headset
usage.
To switch from the headset to the handset:
1. To switch from the headset to the handset, simply lift the handset.
To switch to handsfree from the headset:
1. To switch to handsfree from the headset, press the HEADSET button.
2. Replace the handset.
To switch from the headset to handsfree:
1. Press the SPEAKER button. See Handfree Speaker Operation .
To switch to headset from handsfree:
1. Press the HEADSET button. The button remains lit whilst you have a call connected handsfree.
To mute the call while on the headset:
1. Press the MUTE button. The button remains lit whilst the call is muted. Note that if you switch to the handset
or handsfree, the mute is automatically canceled.
Headset Operation Settings
You can adjust the following headset settings:
· Headset Volume
· Default Audio Path
· Headset Automatic Gain Control On/Off
· Using Wireless Headsets
72
73
71
72
71
72