9500 Series Telephone User Guide Page 26
Issue 12b (Wednesday, March 28, 2018)IP Office™ Platform 11.0
Comments on this document? infodev@avaya.com
2.5 Redialling a Previous Number
When Redial is displayed it can be used in one of two ways, set by the phone's redial mode setting .
List Mode
This redial method is used when your phone's redial mode is set to List.
1. Access the redial list.
a. Press Redial. The list of outgoing calls is displayed.
b. Use the up and down cursor keys to scroll through the 10 most recent outgoing calls.
2. Press Call to call the number displayed in the call record.
3. Continue in the same way as for a normal dialed call.
One Number Mode
This redial method is used when your phone's redial mode is set to One.
1. Press Redial.
2. The number for the most recent outgoing call in your personal call log is redialed.
3. Continue in the same way as for a normal dialed call.
2.6 Making a Page Call
In order to make page calls you must have access to a paging short code provided by the system administrator or to a
paging feature button. If the dialing short code or the paging button have been pre-configured with a number, the user or
group at that number will be paged if available.
The dialing short code can be configured to accept the number of the user or group to page when dialed. Similarly a
paging button can be set to allow number entry when pressed as follows:
1. Press the paging button.
2. Dial the number of the user or group you want to page.
3. When the dialing is completed, the page call is made.
·
If the destination is a user and they already have a call connected, they cannot be paged. If the destination is
a group which is not in service or has no available members, it cannot be paged.
Feature Button
If enabled by your system administrator, the self-administer function can be used to assign a feature button as a page
button using the Group Paging action.
36
36
36
To Next Page
Loading...
