Avaya 9504 - Important Safety Information

9500 Series Telephone User Guide Page 11
Issue 12b (Wednesday, March 28, 2018)IP Office™ Platform 11.0
Comments on this document? infodev@avaya.com
Introduction:
1. Introduction
If unsure if this is the correct guide for your system, contact your system administrator.
· 9500 Series Telephones
The 9504 and 9508 phones are supported on IP Office systems only. They are physically and functionally the same
as their 9400 Series equivalents but are not supported on other Avaya telephone systems.
· Unsupported Features
The 9500 Series phones are supported on a number of Avaya telephone systems and support different features
depending on the telephone system. This guide covers only the features supported on an IP Office telephone
system.
1.1 Important Safety Information
! Warning: This handset may pick up small metal objects such as metal pins or staples.
· During a power surge, EFT (Electronically Fast Transients), or ESD (Electrostatic Discharge), calls may be dropped.
After a power surge, EFT or ESD, it is normal for the phone to restart.
· Using a cell phone, mobile phone, GSM phone or two-way radio in close proximity to an Avaya telephone might
cause interference.
· The phone should not be connected directly to the outdoor telecommunication network.
Note for Australian installations only:
Installations of the telephone with button module and additional power supply is restricted to the same building as the
host IP Office. In this scenario the phone cannot be connected installed in a separate building separate from the IP Office
using out-of-building wiring. This restriction applies to Australian installations only.