Avaya 9504 - Volume and Sound; Button Clicks; Error Tones; Ringer Volume

9500 Series Telephone User Guide Page 130
Issue 12b (Wednesday, March 28, 2018)IP Office™ Platform 11.0
Comments on this document? infodev@avaya.com
17.8 Volume and Sound
This section covers controls that relate to volume and to the various sounds that your phone uses. These are in addition
to the available ringer controls .
· Button Click
Turn the phone menu key click on or off.
· Error Tones
Turn the phone menu error tones on or off.
· Ringer Volume
Adjust the volume of the ringer used by the phone.
· Handset Volume
Adjust the incoming call volume heard through the phone's handset.
· Headset Volume
Adjust the incoming call volume heard through a headset attached to the phone.
· Speaker Volume
Adjust the incoming call volume heard through the phone's speaker.
· Automatic Gain Control
Switch automatic gain control on or off.
Note: The system administrator can configure your phone to reset its volume after each call.
17.8.1 Button Clicks
While using the phone menus, the phone can provide a key press confirmation click sound. This can be disabled.
1. Press the button.
2. Use the up and down cursor keys to highlight Options & Settings. Press Select.
3. Use the up and down cursor keys to highlight Screen & Sound. Press Select.
4. Use the up and down cursor keys to highlight Button Clicks.
5. Press Change to change the setting between On or Off.
6. When completed, press the Save soft key.
7. Press Back / Exit to exit the menus.
17.8.2 Error Tones
The phone provides an error tone when you make an incorrect selection. You can disable the error tone if required.
1. Press the button.
2. Use the up and down cursor keys to highlight Options & Settings. Press Select.
3. Use the up and down cursor keys to highlight Screen & Sound. Press Select.
4. Use the up and down cursor keys to highlight Error Tones.
5. Press Change to change the setting between On or Off.
6. When completed, press the Save soft key.
7. Press Back / Exit to exit the menus.
17.8.3 Ringer Volume
You can adjust the ringer volume while the phone is idle or while it is ringing.
1. With the phone idle or ringing, use the + plus and – minus keys to adjust the volume.
2. Once you stop adjusting the volume, the display returns to normal after a few seconds.
· If you set the volume to zero (off), the phone displays a icon.
120
130
130
130
131
131
131