9500 Series Telephone User Guide Page 146
Issue 12b (Wednesday, March 28, 2018)IP Office™ Platform 11.0
Comments on this document? infodev@avaya.com
20.3 Checking the Time Server Status
For systems that automatically obtain the time from a time server, this option is available in place of the Date ,
Time and Time Offset functions. It allows you to check the current status of the time server and the information
the system has obtained from the time server.
·
Time Display Format
The time format (12 or 24-hour) is controlled by the telephone system. It can be set to either 12-hour or 24-hour
format for all phones by the system administrator.
1. Press the Features soft key if shown. To do this during a call, press the PHONE key and then press the
Features soft key.
2. Use the up and down cursor keys to highlight Phone User. Press Select.
3. Use the up and down cursor keys to highlight System Administration.
·
!Note: This option is only present if you have been configured as a system phone user by your system
administrator.
4. Enter your security PIN (login code) and press Done.
5. Use the up and down cursor keys to highlight Time Server Status. Press Select.
6. The time server information is listed. It includes the address of the time server, the current local time and the
UTC time. If the phone system is configured for daylight savings then the current amount of daylight savings
being applied to the local time is also shown.
145
147 147
To Next Page
Loading...
