9500 Series Telephone User Guide Page 112
Issue 12b (Wednesday, March 28, 2018)IP Office™ Platform 11.0
Comments on this document? infodev@avaya.com
16.2.9 Call Pickup Any
Answer a call currently ringing on the telephone system.
16.2.10 Conf Meet Me
A button programmed to this feature allows you to start or enter a conference by entering the conference ID.
16.2.11 Drop Call
This action can be used to drop your current call without having to highlight it on the display. If the call is connected,
pressing the key ends the call. If the call is ringing it may follow several routes, see Dropping an Incoming Call .
16.2.12 Flash Hook
A button configured for this action will send a flash hook signal to a currently connected analog line.
16.2.13 Group BLF
A button can be programmed to indicate if there are any calls to a group waiting to be answered. A red flashing lamp
indicates that there are calls waiting for the hunt group. Press the button to pickup the longest waiting call.
16.2.14 Page
A button configured with this action can be used to make a page call.
The button can be configured with the target user or group for the page. If configured without a number, pressing the
button will display a menu for number entry before making the page call.
16.2.15 Park and Page
If your system administrator has configured your system for Park & Page , this button allows you to use the feature to
park calls and announce the parked call to other users.
16.2.16 Ringer Off
A button configured with this action can be used to turn your phone's ringer on or off.
When you turn the ringer off the visual alerting is also turned off. When the ringer has been turned off, the button's red
lamp is lit. Pressing the button again will turn the ringer on.
16.2.17 Self Administer
A button configured for this action can be used to access the Self Administer menu.
16.2.18 Send All Calls
A button configured with this action can be used to switch 'do not disturb ' on or off. When 'do not disturb' is on, the
button's red lamp is lit or a red warning icon is displayed. Pressing the button again turns 'do not disturb' off.
16.2.19 Suppress Digits
Masks the display of digits as you dial them on the phone. Dialed digits are replaced with an s character. The button is
used to switch the suppression on/off. When 'suppress digits' has been set, the button's red lamp is lit. Pressing the
button again cancels the suppression.
·
If en-block dialing is active you will see the digits as you dial them. When you make the call the digits will be
suppressed.
·
When the option to suppress digits is used, the call is not recorded in the call log.
33
56
110
46
27
To Next Page
Loading...
