Avaya 9504 - Timer; Twinning; User BLF

9500 Series Telephone User Guide Page 113
Issue 12b (Wednesday, March 28, 2018)IP Office™ Platform 11.0
Comments on this document? infodev@avaya.com
Feature Buttons: Features
16.2.20 Timer
When a call is made or answered on a call appearance, the call appearance line can include a call timer. This is controlled
by the phone's Call Timer setting.
During the call you may want to show or hide the call timer associated with the currently selected call appearance; for
example, in order to see more of the caller ID information. Temporarily turning the call timer of the currently selected call
appearance on or off can be done using a Timer button.
Note that when the call appearance is next used, the Call Timer setting determines whether or not the timer is
initially displayed.
16.2.21 Twinning
A button configured for this feature allows you to control your phone's mobile twinning operation. This is only useable if
your system administrator has configured you for mobile twinning.
· If pressed when the phone is idle, the phone displays the mobile twinning menu . You can use the menu to
switch mobile twinning on/off and to setting the twinned destination.
· If pressed while a twinned call is connected to the twinned destination, the system attempts to reclaim the call.
· If pressed while connected to a call on the phone, the system attempts to transfer the call to the twinned
destination. You do not need twinning switched on to use this feature.
16.2.22 User BLF
This type of button can be used to monitor the status of another user. The button lamp indicates the status of the user.
· Off = Available
Pressing the button will make a call to the user. In addition to calling the user, you can use the user button to
transfer calls to the user or to start a conference with the user.
· Slow Flash = Ringing
Pressing the button will display options to pickup the call.
· Fast Flash = On a Call
Pressing the button will display a number of options:
· Call - Call the user.
· Message - Cause a single burst of ringing on the user's phone. They will also see the message "Please Call"
followed by your extension number.
· Voicemail - Call the user's voicemail mailbox to leave a message.
· Auto Callback - Set an automatic callback on the user. The callback will occur when the user ends their
current call.
The following options are only available if configured for you by your system administrator:
· Drop Call - Disconnect the user's current call.
· Acquire - Seize the user's current call.
· Intrude - Join the user's current call, turning it into a conference call.
· Listen - Start silent monitoring of the user's call.
127
127
48