9500 Series Telephone User Guide Page 117
Issue 12b (Wednesday, March 28, 2018)IP Office™ Platform 11.0
Comments on this document? infodev@avaya.com
Phone Settings:
17.1 Mobile Twinning
This menu option is only available if you have been configured by the system administrator to be able to use mobile
twinning.
·
Setting a button to the Twinning function is recommended—contact your system administrator. Such a button
allows you to transfer calls to your twinning destination, retrieve calls from the twinning destination, and access
the menu options below to set the twinning destination number and switch twinning on/off.
1. Press the Features soft key if shown. To do this during a call, press the PHONE key and then press the
Features soft key.
2. Use the up and down cursor keys to highlight Forward. Press Select.
3. Use the up and down cursor keys to highlight Mobile Twinning. Press Select.
4. If no twinning number has been set, the menu will prompt you to enter a number.
5. When a number has been entered, you can access the Enable and Disable soft keys to turn use of mobile
twinning on or off. The Clear soft key removes the existing twinning number in order to allow entry of a new
number.
17.2 Withhold Number
You can select to withhold your number on external calls. Note that this option may not be supported in all situations. It
may depend on the configuration of your phone system and options supported by your telephone line provider.
To withhold your number:
1. Press the Features soft key if shown. To do this during a call, press the PHONE key and then press the
Features soft key.
2. Use the up and down cursor keys to highlight Call Settings. Press Select.
3. Use the up and down cursor keys to highlight Withhold Number.
4. Press Change to switch the option On or Off.
5. Press Save.
Access Control
Your system administrator can configure whether you can access this menu option. See Menu Access Control .
17.3 Redial Mode
You can select whether your phone uses the redial list or last call redial mode.
1. Press the Features soft key if shown. To do this during a call, press the PHONE key and then press the
Features soft key.
2. Use the up and down cursor keys to highlight Call Settings. Press Select.
3. Use the up and down cursor keys to highlight Redial Action.
4. The current mode, Open Call Log or Last Dialed is displayed.
·
Open Call Log
If this mode is selected, pressing Redial will display a menu of the most recent outgoing calls in your call log.
You can select the call that you want to redial and perform a number of other functions.
·
Last Dialed
If this mode is selected, pressing Redial will immediately repeat the most recent outgoing call in your call log.
None of the other redial functions will be accessible.
5. Press Change to change the mode.
6. When the desired mode is displayed, press Save.
155
36
36
To Next Page
Loading...
