9500 Series Telephone User Guide Page 127
Issue 12b (Wednesday, March 28, 2018)IP Office™ Platform 11.0
Comments on this document? infodev@avaya.com
Phone Settings: Display Controls
17.7.3 Last Call Duration Display
As an alternate to call timer display, you can have the phone briefly (4 seconds) display the duration of the call after it
is ended.
1. Press the Features soft key if shown. To do this during a call, press the PHONE key and then press the
Features soft key.
2. Use the up and down cursor keys to highlight Call Settings. Press Select.
3. Use the up and down cursor keys to highlight Show Last Call Duration.
4. Press Change to change the setting between On or Off.
5. Press the Save soft key.
17.7.4 Single/Dual Column Display
The phone can be set to use either the full screen width (single-column mode) or just a half-width (dual-column mode)
for each programmable appearance and feature button. The number of programmable buttons that can be configured is
not affected by the selected display mode.
Your system administrator can select which option is used by default. However, you can then select which one you
prefer.
1. Press the Features soft key if shown. To do this during a call, press the PHONE key and then press the
Features soft key.
2. Use the up and down cursor keys to highlight Phone User. Press Select.
3. Use the up and down cursor keys to highlight Phone Screen Settings. Press Select.
4. Use the up and down cursor keys to highlight Display Mode.
5. Press the Change soft key to change the setting or use the left or right cursor keys.
·
Dual Column
Each programmed button occupies one half of the screen line on which it is displayed, either the right-hand or
left-hand side. The adjacent physical button on that side of the display is used to indicate the button's status
and to control the button feature.
·
Single Column
Each programmed button feature occupies the full width of the screen. The physical buttons on both sides of
the display are used to control the button feature. However, the button status is only shown by the left-hand
button. In this mode, appearance button labels also show a call status icon (for example: idle, alerting,
connected).
6. Press the Save soft key.
17.7.5 Call Timer Display
When you have calls alerting on appearance buttons, the phone can include a timer in the appearance details shown on
the display. The timer shows how long the call has been alerting and, if you answer the call, resets to show how long the
call has been connected. The timer will also show how long a call has been on hold when you hold the call.
You can turn the timer display on or off. Turning it off provides more space for other call details on the display.
·
For the currently selected call appearance, the call timer display can be temporarily turned on or off using a
programmable button set to the Timer function.
17.7.6 Display Language
The system administrator can configure which languages are available for use by the phone for its own menus. Up to five
languages can be made available.
Through the phone's menu you can select which of those languages the phone should use.
Note that many of the messages displayed on the phone use text sent from the telephone system. They will use the
default language of the telephone system unless the system administrator has set your extension to use a specific
language supported by the phone system.
1. Press the button.
2. Use the up and down cursor keys to highlight Advanced Options. Press Select.
3. Use the up and down cursor keys to highlight Language. Press Select.
4. Use the up and down cursor keys to scroll through the available languages. The current language is indicated by a
tick mark.
127
113
To Next Page
Loading...
