Field Names and Descriptions
Issue 3 May 2002
4-35
Use this screen as follows:
â– To delete a port:
1. Press or use the arrow keys to move the cursor to the line you
want to delete, and then press . (This deletes the entire line.)
2. The following prompt appears: Are you sure? (Y/N). Type Y
and press .
If you type N and press , the cursor reappears at the
beginning of the line and the line is not deleted.
3. Repeat steps 1 and 2 until you have deleted all desired ports. Then
press and the Main Menu reappears.
â– To add a port, press to access the Add Client Link screen.
â– To update the screen with current information, press .
Field Name Description
Port Port number used on the DEFINITY system. Valid range is
1 to 12. Each port can only be assigned once.
Client Name or
IP Address
Host name or IP address of the client machine authorized to
connect to this port. (Network name of the adjunct.) Must be
resolvable by the local host table, or be an IP address.
Maximum field size = 20 characters.
Client Link Link number from 1 to 8, used by client when connecting to
this port, if client has more than 1 logical link into the DLG.
Default = 1.
Client Status Read-only. Either in use or idle. Idle client states may
be modified or deleted. If you attempt to delete a port which
is in use, the ASAI link associated with that port is
disconnected.
DELETE
RETURN
RETURN
CANCEL
ADD
UPDATE
To Next Page
Loading...
Need help?
General
