Terminal and Modem Option Settings
B-2 Issue 3 May 2002
Worksheet B-1: Terminals/Modems
Date ___________________________
Prepared By ___________________________
Contact Telephone Number ___________________________
To the AE:
Complete this worksheet with the customer before configuring and ordering the
MAPD system.
Options Terminal 1 Terminal 2
What type of terminal would you like to use?
Options are: 715 BCT,513 BCT, 4410, 4415, 4425, 5410,
5420, 5425, 610 and 615 (using 513, 4410, or 4425
emulation cartridge), or a PC with a 513 or 4410 emulation
package or G3-MA. Also, the Cross-Talk software tool (via
513 emulation), or Telnet with an emulated terminal type
vt100, vt220, vt320, vt950, ibm3101, ibm5051, hp2621,
hp2624, ansi, wyse50, wyse60, or PC. (The 715 BCT
terminal allows an administrator to toggle between the
DEFINITY system administration screens and MAPD system
screens.)
How would you like the terminal connected to the MAPD
system? You can implement any of the following:
â– Directly via cables
â– Via modem
The standard modem will be the Sportster
®
External
33.6 fax modem from US Robotics. Instructions on
how to properly setup this modem are provided in
Section, "Setting up the US Robotics Sportster
External 33.6 Fax Modem for the Local Console Port
(Admin/Port B)" in this Appendix, and it can be ordered
from Avaya. Other modems can also be used provided
they are properly setup.
What length cables would you like for the terminals? Default
is 50 feet: other options are 10, 20. 30, or 40.