Installing the MAPD
2-22 Issue 3 May 2002
Planning: Task 4 — Connecting to the
LAN
The MAPD Board cable has four connectors available for outside connections:
â– RJ45 Local Area Network (LAN)
â– Admin/Port B, RS-232 (Local administration port)
â– Maint/Port A, RS-232 (Remote Maintenance Port)
â– DCIU, RS-232 (Reserved for future use)
Figure 2-12. MAPD Board Cable Connections
Switch
MAPD
Board
MAPD
Cable
RJ45 to LAN
DCIU (Reserved for future use)
Admin/Port B (RS-232 F)
Maint/Port A (RS-232 F)