PBX Carrier Configuration Worksheets
Issue 3 May 2002
A-3
Worksheet A-2: Port Assignments
(for Carrier Rearrangement)
Date ___________________________
Prepared By ___________________________
Contact Telephone Number ___________________________
Complete the following worksheet to indicate how circuit packs should be
arranged in the PBX carrier before the MAPD system is installed. On the
worksheet, the slots are numbered as seen from the front of the carrier, with slot 1
on the far left and slot 20 on the far right. It is not necessary to fill in the worksheet
for all the existing circuit packs; simply specify the new positions or circuit packs
that must be moved (if any) and then indicate the three slots the MAPD system is
to occupy.
Use the information in this appendix to determine the carrier into which the MAPD
system should be installed.
Carrier Function CARRIER A CARRIER B CARRIER C CARRIER D CARRIER E
port slot 1
port slot 2
port slot 3
port slot 4
port slot 5
port slot 6
port slot 7
port slot 8
port slot 9
port slot 10
port slot 11
port slot 12
port slot 13
port slot 14
port slot 15
port slot 16
port slot 17
port slot 18
port slot 19
port slot 20
To Next Page
Loading...
Need help?
General
