Avaya Definity - Diagnostics - Hardware Alarms

CVLAN System Administration
5-46 Issue 3 May 2002
Diagnostics — Hardware Alarms
Screen 5-30. Hardware Alarms
This is a read-only screen that displays any hardware alarms.
NOTE:
Contact the TSC if there are any alarms or if any of the tests fail.
Use this screen as follows:
■ Press to return to the Diagnostics menu.
Field Name Description
TN Code/Vintage Displays the MAPD (TN801B) board code and vintage as
reported by the DEFINITY system.
FW Version Displays the firmware versions.
RM Version Displays the remote maintenance firmware versions.
Alarm Count Displays the number of active alarms followed by a
description of each alarm and its severity.
The messages which follow are the result of your last request.
At the : prompt press RETURN to view more messages.
TN Code/Vintage:
TN801B V2
FW Version:
BOOT=PIFN 20496, FW version 16, Dev_id O, Comp_id 10
(EOF):
At the (EOF): prompt press RETURN to continue.
APPL=PIFN 20496, FW version 16, Dev_id O, Comp_id 10
BOOT=1.0.8(boot)
RM Version:
APPL=1.0.8
Active: APPL
Alarm Count: 0
(no alarms)
RETURN