PBX Carrier Configuration Worksheets
A-4 Issue 3 May 2002
Worksheet A-3: Port Slot Locations
for the MAPD System Assembly
Date ___________________________
Prepared By ___________________________
Contact Telephone Number ___________________________
On the table below, specify the locations of the three contiguous slots into which
the MAPD system assembly is to be installed.
The three contiguous slots are administered with codes or left blank as shown
below.
Slot occupied by MAPD Digital Port Equipment Location
first
second
third
Switch Slot 1 Slot 2 Slot 3
R5 and higher
(provisioned with R6.3 or
later software in V5 or V6
mode)
Reserved Reserved TN801B
To Next Page
Loading...
Need help?
General
