MAPD Task 1: Setting the MAPD Clock
Issue 3 May 2002
3-9
MAPD Task 1: Setting the
MAPD Clock
The objective of this task is set the MAPD system time, date and time zone. For a
complete description of the Set System Time and Date screen see "Set System
Time and Date" on page 4-49.
Procedure to Set the MAPD Clock
This procedure assumes that you have logged into the MAPD system and are at
the Main Menu (see "Task 1: Basic Administration — Logging in to the MAPD
System" on page 3-6.)
Follow these steps to set the MAPD clock.
1. From the Main Menu, select
4. Maintenance
The System displays the Maintenance Menu.
2. From the Maintenance Menu, select
2. Set System Time and Date.
The system displays the Maintenance, Set System Time and Date screen.
Screen 3-5. MAPD Maintenance, Set System Time and Date
3. In the
Time: field, enter the time of day in hours and minutes (hh:mm),
based on a 24-hour clock. For example,
14:00 (for 2:00 p.m.).
This line is used to provide abbreviated help on the currently selected field.
Maintenance
ENTER CLEARCANCEL REFRESH HELP
Set System Time and Date
Time: __:__ Month: __ Day: __ Year: ____
Standard Timezone Information
ST Name: __________
Offset Time: __:__
Direction (E/W): _
Daylight Savings Timezone Information
DST Name: ___________
To Next Page
Loading...
Need help?
General
