Setting up the MAPD Configuration
3-10 Issue 3 May 2002
4. In the Month: field, enter a two-digit month identifier. For example 04 (for
April).
5. In the Day: field, enter a two-digit identifier for the day of the week. For
example
05 (for Friday).
6. In the
Year: field enter the four-digit calendar year. For example, 2002.
7. In the ST Name field, enter the name or abbreviation of the standard time
zone for your location. For example, Pacific.
8. In the Offset Time field, enter four digit value for the number of hours that
vary from Universal Time (also known as Greenwich Mean Time). For
example, if you select Pacific for your time zone, the offset time is
08:00.
9. In the
Direction E/W: field enter either E or W. This field refers to the
direction your location is from the Universal Time zone (If you enter Pacific
in Step 6, you would enter
W for offset.
10. (This step is optional) In the DST Name: field, enter the name of the time
zone you specified in Step 7 (for example, Pacific). Keep in mind that
when you specify a time zone in the DST Name field, you are setting an
alternate time zone that follows U.S. Daylight Savings rules.
11. Press ENTER when you have completed the fields for the “Maintenance,
Set System Time and Date” screen.
The system returns you to the Maintenance Screen.
12. Press CTRL-F 1 (EXIT) to return to the Main Menu.
To Next Page
Loading...
Need help?
General
