Field Names and Descriptions
Issue 3 May 2002
6-43
Diagnostics — Ping Host
Screen 6-27. Ping Host
This screen allows the user to test the connection between the MAPD and any
host.
Use this screen as follows:
1. Type the host name, IP Address, packet count, and packet size. Use
or the arrow keys to move from field to field.
2. When you are done entering data, press to enter the data, or
to return to the Maintenance menu. If you press , this
displays the results and redisplays this screen. (You can do multiple pings.)
Field Name Description
Host Name or IP
Address
Name or IP address of the host you are trying to
ping. Maximum field size = 20 characters.
Packet Count The number of packets sent between the MAPD
and the host. Valid range is 1-999. Default = 1.
Packet Size The size of the packets sent between the MAPD
and the host. Valid range is 64-999. Default = 64.
This line is used to provide abbreviated help on the currently selected field.
Maintenance
ENTER CLEARCANCEL REFRESH HELP
Diagnostics
Host Name or IP Address: _____________________
Packet count: ___
Ping Host
Packet size: ___
TAB
ENTER
CANCEL ENTER
To Next Page
Loading...
Need help?
General
