Setting up the MAPD Configuration
3-14 Issue 3 May 2002
Task 5A1, Alternative Procedure to Ping the
MAPD Itself — If Customer Is Unavailable
NOTE:
This test is internal to the MAPD system, and does not access the
customer’s LAN. The MAPD is pinging itself.
1. From the MAPD Main Menu, Select 4. Maintenance
2. The system displays the Maintenance Menu.
3. Select 6.
Diagnostics
4. The system displays the Maintenance, Diagnostics screen.
5. Select
1. Ping Host
6. The system displays the Maintenance Diagnostics, Ping Host screen.
Screen 3-7. MAPD, Maintenance Diagnostics, Ping Host
7. In the
Host Name or IP address field type the host name or IP
address of the MAPD. For example,
192.168.25.10
8. In the
Packet Count field, type 20 (recommended),
9. In the
Packet size field, type 64 (recommended).
10. Press Enter to complete the Ping Host screen.
This line is used to provide abbreviated help on the currently selected field.
Maintenance
ENTER CLEARCANCEL REFRESH HELP
Diagnostics
Host Name or IP Address: _____________________
Packet count: ___
Ping Host
Packet size: ___
To Next Page
Loading...
Need help?
General
